Find Select Projects Easier

If you're looking for a specific project that I've done, please click here for a categorized list page.

Don't Forget To Leave A Comment

If an article interests you, please click below it where it tells the number of comments and leave one. I appreciate all input.

Get My Blog In Your Email

Enter your email address:

Delivered by FeedBurner

Thursday, November 18, 2010

Unicorn Cabinet

This project has turned into one of those that kept evolving right up until it was done. This is a present I am giving my lovely wife for Christmas. It started out going to be a rocking unicorn in the same style as the carousel horses I had done in the past. From the onset though, I kept making changes, mainly because I wanted my wife to have something different than what I've made for other people in the past.
So the first thing that had to go was the pole that ran up past the top of the animal's body. Instead it became just a unicorn up on a stand.
Then I started thinking about where she might put this. She's been wanting one of these for some time and I know she wanted it in our bedroom. I also knew our bedroom already has too much stuff and not enough room. So I figured, why not eliminate the rocker theme all together and mount it on a cabinet that she can use to store some stuff in. I started thinking about that. I just couldn't build her a simple square cabinet. I thought about round cabinets, corner triangular cabinets. The design you see in the photos is what I eventually decided on. It is an elongated, eight sided design. Of course it had to be her favorite color of purple.
So after I built all of this I started thinking of a decorating theme. After going through many different ideas, I wound up with the idea to make it look like the unicorn was sort of running through a field of flowers. From there, my creation went into overdrive. I wound up adding four vines, forty eight leaves, and over a hundred flowers to the design.
The last detail to make was the horn. I learned how to make the spiral for the horn a while back when I built a rocking unicorn for the daughter of a friend of mine. That unicorn had a seven inch horn, which looked good, but I had to decide what length I wanted to make this one. After going home and looking at some of my wife's favorite unicorns, it struck me that all her favorites are the one's with exceptionally long horns. So I made the horn for this one twelve inches long.

Saturday, November 6, 2010

Scrolled Cedar Chest

This particular project has been a long time in the making. I made it for a Christmas present for my seventeen year old daughter. I seen the plans for this chest over a year ago. I knew as soon as I laid eyes on the photo on the Wildwood Designs website that I wanted to build one of these for my daughter out of aromatic cedar. So I ordered the plans although I didn't even have a strip of firewood made out of cedar. Then I started looking for the cedar and grabbing up everything that I seen. Most of the wood that eventually got used for the chest came out of a man's barn. He said the wood had been in there for over fifty years.
So, because of the delicate nature of the scroll work, it is cut out of luan plywood. Besides that scroll work, everything else on this chest is made entirely of aromatic cedar. The scrollwork was then covered with polyurethane. Then the entire outside of the chest got a total of five coats of Johnson's paste wax and was hand buffed in between each coat. Of course the inside of the chest was left without finish so that the wonderful smell of aromatic cedar can be enjoyed.
To give you an idea of the magnitude of this project, there is a total of over ten hours of work, just in the scroll work alone. Also, several people that I spoke with assured me that this project would be a complete failure being made out of aromatic cedar. I was told that while constructing it, the delicate nature of this type of wood was going to split too bad. The general consensus was that the only way to get this job done was going to be to build the chest out of hardwood and line it with cedar. However, I knew for a fact that as many cedar chest I have seen that were built years and years ago, that I could get it done if I tried hard enough.
It turns out that there was some truth to what I was told about how easily aromatic cedar is made into useless firewood if you're not careful. During construction it is easy to split the wood using screws or any large nails. Another thing I learned was to carefully plan out how you cut your lumber. This wood has a lot of knots in it. Although those knots make for beautiful colors wherever they are placed, you have to be aware that it splits and breaks easiest the closer you get to those knots, you have to carefully be plan the placement of those knots in relation to where you place nails and joints.
So here is the scrolled cedar chest. It is finally done after over a year of making plans to build it. Personally, I am quite pleased at the results. If you'd like to build one of these yourself, the plans for it can be purchased here
Now I've got to start looking for more cedar. I know several other people I may build one of these for in the future. I can't wait for my daughter to see it Christmas morning. I hope she loves it as much as everyone else who has seen it has.

Monday, November 1, 2010

More Tools

These are more Christmas presents for my younger boys. I made them the tool boxes. I had originally planned on toy tools as well. However, in the end I decided on real tools. They already have experience with small projects using hand tools from me teaching them and from the Home Depot Kid's Workshop we go to every month. I always have scrap wood lying around they can nail together. So I decided getting them their own hand tools was the way to go.